Anybody made their own "Inside Approach"?

[bendet3]

Brian's emphasis in some of his posts about "swinging under the stick" had me thinking of the swing aid "Inside approach" and I know that there has been some discussion before about making one from pvc tubing, just wondering if anybody has done this with any success and what the specs were for "their" model?

 

[curtisj76]

Yeah I've made 2. If you use just one you may develop too much of an inside path. I use 2. One for the inside and one for the outside.

PS Don't listen to me though I'm not that good!!!!!!!!!!!!!

 

[Jim Kobylinski]

Yeah I've made 2. If you use just one you may develop too much of an inside path. I use 2. One for the inside and one for the outside.

PS Don't listen to me though I'm not that good!!!!!!!!!!!!!

Listen to curtis he is smart, brian said he over fixed quite a few people with that thing. You have to learn how not to "over do it."

 

[birdie_man]

You could do it somehow with one of those goofy pool foam things, no?

Although it might get all bent...

 

[joeprunes]

Its easy to make,however I bought the original.. I swung down uder every time and never missed and I have an over the top move. It didnt help me one bit unless i could of used it on the fairways with me....joe

 

[Perfect Impact]

There are some training aids seem like they intend to "trick" the golfer into doing something right. But once you know what they are trying to trick you into doing, you don't need them: just do what it is required.

Once removed, if you didn't know exactly what you were doing, you won't repeat it.

They patronize people unnecessarily.

Caveat emptor.

(an emptor is someone whose pockets get emptied)