How to fix my clubface

[bcoak]

Hit balls for the first time of the season here in MA. After listening to BM over the years, it finally sunk in that I really need to figure out how to fix my clubface. Here's the deal: my ball flight, esp. my irons is a weak cut (driver too). Ball starts at target/right of target and slices. Divots point left of target. I have a flw at the top. However, when i came down in slow motion there is no release into the ball and the angle that I had at the top is the same at impact - open LW and open clubface. (A little more open than this mark / )
I assume my divots are left of target becuae I am coming over in an effort to square it up.
I happened to see this swing of Hogan yesterday:
http://www.julesalexander.com/hogan.html

I tried to get my wrist into this position but started pulling the ball. My guess is the pull was a result of the same swing path I had in ingrained trying to straighten out the slice. Ball flight and power was better though.

With the beginning of the season here I would really like to get off to a good start and I think fixing my clubface is the best place to start.
Any advice?

 

[Brian Manzella]

Sorry for the delay...

You need more Axis Tilt and you need to work on "swinging under the stick."

Also, you may need a more level shoulder turn. How is it going?

 

[Brian Manzella]

Folks, this is an important post.

You need to be able to sepate clubFACE from clubPATH!

 

[bcoak]

You need more Axis Tilt and you need to work on "swinging under the stick."

Also, you may need a more level shoulder turn. How is it going?

Unfortunately we got 8in of snow so progress slowed. When you say a more level shoulder turn do you mean downswing or backswing?

Was I on the riught track with my thoughts on clubface open and path OTT to correct the open face?
Thansk for the response.