Leakage Pull

Status
Not open for further replies.
I am a former flipper. I have got rid of most of my flip, but video shows I am struggling to get rid of the last bit of it. I thought it was gone because I am hitting my five iron about 200 and driver about 290 with high ball flight, so I don't know how I am doing that with a flip, but anyway....As a result, it looks like my last bit of flip is causing my main miss, a pull. Usually it is very playable, but sometimes it is a round killer. I am not going to get to see Brian again until September and my club championship is over the next three weeks. Any suggestions would be welcomed.

Thanks.

Details:

-Using soft draw pattern
-Use a slightly stronger grip than neutral
-Club tends to be closed on the way back and at the top due to use of NSA a few years ago, seems to be a habit I am struggling to break.
-I am not coming too far from the inside. Path looks good on video.
-To prepare for the flip, it looks like I release my lag a little early perhaps closing the face too soon.
 
so,
just a thought....

When you flip, do you go to a full finish?....

Try practicing with a two finger overlap and see if the flipping is reduced....

BTW, your figures are good, I wouldn't change too much..:)
 
Last edited:
so,
just a thought....

When you flip, do you go to a full finish?....

Try practicing with a two finger overlap and see if the flipping is reduced....

BTW, your figures are good, I wouldn't change too much..:)

I do get to a full finish. I will try the overlap.

My figures are good, but a few times a round the 5-10 yard pull with the driver or hybrid turns into a 70 yard pull that kills my round.

Thanks.
 
For me it works if I keep with my spine angle till at least club is horizontal after impact (head back). This way I can't flip (not enought space) cause I will hit the ground 5-8 inches behind the bal.l
 
Status
Not open for further replies.
Top