So I figured out how to swing left, but.....

[2mongoose]

.........now I'm hitting a pull-cut. Never thought I'd be able to ingrain that feeling but here we are. The range balls aren't the best at the dome and they leave a little residue. From the looks of my clubs everything is in the heel.

Remedy:
1) clubface issues - obv it's open, need to lag the sweetspot a little more
2) path has to be OTT - I've been getting real steep at the top (even above TSP ). Getting a little more "around" can't hurt. Any ideas here?

Anyone w/ any other ideas on how to get back to the center of the matrix?

 

[benhogan55]

.........now I'm hitting a pull-cut. Never thought I'd be able to ingrain that feeling but here we are. The range balls aren't the best at the dome and they leave a little residue. From the looks of my clubs everything is in the heel.

Remedy:
1) clubface issues - obv it's open, need to lag the sweetspot a little more
2) path has to be OTT - I've been getting real steep at the top (even above TSP ). Getting a little more "around" can't hurt. Any ideas here?

Anyone w/ any other ideas on how to get back to the center of the matrix?

Sounds like you may be lacking enough axis tilt. I would check your pivot and the fall foward the left side. Read Brian's definition of the pivot...can't tell you how much it improved my ability to stop OTT.
http://www.brianmanzella.com/forum/showthread.php?t=8120&highlight=pivot

As for clubface position...whenever I notice too much cut, I immediately work on Brian's "twistway"....problem solved.

Hope this helps!