WEDGE WEIGHT VS IRON WEIGHT

[jenhaoyen]

I have S300 on my Irons, was wondering if I should order S200 or S300 for the 60,56,52 degrees wedge.

I do feel like S300 for Wedge is pretty good, but hard to work around the greens. S200 is a little bit too light for a full swing.

any advice?

 

[JonWil]

Soft step an s300 9 shaft to your wedge?

 

[cwdlaw223]

How the weight is dispersed in the shaft is just as important as the total weight of the iron. For example, the KBS C Taper vs. the DGS have vastly different balance points. That dramaticaly affects swingweight. A good fitter can add weight to the head/hosel.

 

[Jim Kobylinski]

Most players like S400 in their wedges, bit heavier, slightly stiffer but less than the X100. The weight and stiffer tip help you with flighting trajectory

 

[jenhaoyen]

Most players like S400 in their wedges, bit heavier, slightly stiffer but less than the X100. The weight and stiffer tip help you with flighting trajectory

Jim knows about the equipment!

 

[dschultz6072]

Ti wedges "wedge flex" is roughly an S200, or so I've heard.

 

[Jim Kobylinski]

Ti wedges "wedge flex" is roughly an S200, or so I've heard.

Correct most "wedge" flexes are S200.

I'm also a fan of the true temper spinner wedge as well; they come standard in the mizuno wedges which i'm also a fan of.